JN0-364 Zertifizierungsantworten, JN0-364 Zertifikatsdemo

Wiki Article

Übrigens, Sie können die vollständige Version der DeutschPrüfung JN0-364 Prüfungsfragen aus dem Cloud-Speicher herunterladen: https://drive.google.com/open?id=18P4KEv491L2Fzr3ZW9ZWhOpM2Fspq3zk

Sie brauchen nicht so viel Geld und Zeit, nur ungefähr 30 Stunden spezielle Ausbildung, dann können Sie ganz einfach die Juniper JN0-364 Zertifizierungsprüfung nur einmalig bestehen. DeutschPrüfung bietet Ihnen die Prüfungsthemen, deren Ähnlichkeit mit den realen Prüfungsübungen sehr groß ist.

Die Fragenkataloge zur Juniper JN0-364 Zertifizierungsprüfung von DeutschPrüfung sind die besten. Wenn Sie ein Juniper -Fachmann sind, sind sie Ihnen ganz notwendig. Sie sind ganz zuverlässig. Wir bieten speziell den JN0-364 -Kandidaten die Schulungsunterlagen, die Prüfungsfragen und Antworten zur JN0-364 Zertifizierung enthalten. Viele JN0-364 -Fachleute streben danach, die Juniper JN0-364 Prüfung zu bestehen. Die Erfolgsquote von DeutschPrüfung ist unglaublich hoch. Unser DeutschPrüfung setzt sich dafür ein, Ihnen zu helfen, den Erfolg zu erlangen.

>> JN0-364 Zertifizierungsantworten <<

JN0-364 Zertifikatsdemo - JN0-364 Testfagen

Wenn Sie Ihre IT-Fähigkeiten erhöhen und die Juniper JN0-364 Zertifizierungsprüfung einmalig bestehen möchten, können Sie auf DeutschPrüfung vertrauen. Denn DeutschPrüfung kann Ihnen helfen, das Prüfungszertifikat zu bekommen, indem wir Ihnen die zutreffendesten und genauesten Fragenkataloge zur Juniper JN0-364 Zertifizierungsprüfung anbieten. Wenn Sie mit dem Kaufen noch zögern, können Sie die Demo auf unserer Webseite DeutschPrüfung herunterladen. Wir sind sicher, dass Sie nicht enttäuscht sein werden.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 Prüfungsfragen mit Lösungen (Q173-Q178):

173. Frage
You are troubleshooting a Level 1 IS-IS router that has an adjacency with a Level 1/2 router. Which two statements are correct in this scenario? (Choose two.)

Antwort: B,D

Begründung:
In the context ofJuniper Networks Junos OSand theIS-IS (Intermediate System to Intermediate System) protocol, understanding the hierarchical relationship between router levels is critical for effective troubleshooting and design. IS-IS uses a two-level hierarchy to manage scalability:Level 1 (L1), which represents intra-area routing, andLevel 2 (L2), which represents inter-area backbone routing.
When a router is configured as aLevel 1/2 (L1/L2)device, it acts as a bridge between the two levels.
According to Juniper technical documentation, an L1/L2 router maintains two completelyseparate Link- State Databases (LSDB)-one for Level 1 and one for Level 2. It does not merge these into a single topology. This separation ensures that local area topology changes (L1) do not necessarily flood into the backbone (L2) unless specific redistribution is configured, and vice versa. Therefore, statementCis correct because the L1/L2 router maintains distinct SPF (Shortest Path First) computations for each level.
Regarding the visibility of the Level 1 router, IS-IS is designed to keep L1 areas "stubby" by default. ALevel
1 routeronly possesses the topology information for its own area (the Level 1 LSDB). It does not receive specific L2 routes or the L2 topology. Instead, the L1/L2 router sets theAttached (ATT) bitin its L1 Link- State PDUs (LSPs) to signal to L1-only routers that it has a connection to the backbone. The L1 router then generates a default route pointing to the L1/L2 router to reach inter-area destinations. This confirms that statementDis correct: the L1 router's knowledge is limited to its local L1 topology.
Conversely, statements A and B are incorrect because merging topologies would violate the hierarchical scaling principles of IS-IS, and L1 routers never learn the full L2 topology without explicit, non-standard route leaking.


174. Frage
Which BGP attribute is optional, transitive, and is passed unchanged to other BGP peers if not recognized?

Antwort: A

Begründung:
BGP attributes are categorized into four distinct types based on how they are handled by a BGP speaker:Well- known mandatory,Well-known discretionary,Optional transitive, andOptional non-transitive.
Understanding these categories is essential for traffic engineering and ensuring consistent policy across an Autonomous System.
According to Juniper Networks technical documentation, theCommunityattribute is classified as anoptional transitiveattribute. The term "optional" implies that a BGP implementation is not required to support or recognize the attribute. However, because it is "transitive," if a Juniper router receives an update containing a community tag that it does not recognize or has no specific policy for, it must accept the attribute and pass it along to other BGP peers unchanged. This ensures that community-based policies can be signaled across intermediate ASes that may not be configured to act upon those specific tags.
In contrast:
* Origin (Option A)andAS Path (Option B)arewell-known mandatoryattributes. Every BGP update must include these, and every BGP-compliant router must recognize them.
* MED (Option D)(Multi-Exit Discriminator) is anoptional non-transitiveattribute. If a router receives a MED and advertises that route to an EBGP peer, the MED is typically stripped away (unless specific configurations like path-selection cisco-non-deterministic are used), as it is intended only to influence the immediate neighboring AS.
The Community attribute (defined in RFC 1997) is a powerful tool in Junos OS, often used for tagging routes to trigger specific routing policies, such as setting local preference or identifying the geographic origin of a prefix. By being transitive, it allows for sophisticated administrative control across complex multi-provider environments.


175. Frage
Which two statements regarding GRE and IP-IP tunnels are correct? (Choose two.)

Antwort: A,D

Begründung:
GRE and IP-IP tunnels encapsulate the original packet inside a new IP header, which increases the packet size and therefore adds additional overhead to the transmitted packets.
These tunneling mechanisms do not provide encryption. They only encapsulate packets for transport across another network, so separate technologies such as IPsec are required if encryption is needed.


176. Frage

In the exhibit, Site A is sending traffic to Site B. R1 adds MPLS label 7166 to direct the traffic to R5. Which two criteria did R1 use to determine which label number to add to the traffic? (Choose two.)

Antwort: B,C

Begründung:
In a Juniper Networks MPLS environment, the process by which a router determines how to forward traffic involves both the control plane and the data plane. When R1 (acting as an Ingress Label Edge Router, or LER) receives an IP packet from Site A destined for Site B, it must perform a lookup to decide whether to forward the packet via standard IP routing or via an MPLS Label Switched Path (LSP).
The first criterion R1 uses is thedestination address of the traffic(Option C). Upon receiving the native IP packet, R1 looks up the destination IP in its routing table (typically inet.0). If the destination matches a prefix that is associated with an LSP-such as the loopback address of R5 or a prefix reachable via R5-the router identifies the appropriate Forwarding Equivalence Class (FEC). The FEC essentially groups packets that should be forwarded in the same manner over the same path. Without identifying the destination, the router cannot map the traffic to the correct MPLS tunnel.
The second criterion is thelabel number advertisement received from R2(Option D). MPLS relies on downstream label allocation. In this topology, R2 is the immediate downstream "next hop" for R1 on the path to Site B. For the LSP to be established, R2 must signal a label to R1 using a protocol like LDP (Label Distribution Protocol) or RSVP (Resource Reservation Protocol). This label (in this case, 7166) tells R1: "If you want to send traffic to the destination associated with this LSP, wrap it in this specific label so I know how to process it." R1 does not use the source address (Option A) for standard label mapping, nor does it receive the label directly from R5 (Option B) in a hop-by-hop signaling model; it must use the label provided by its direct neighbor, R2. Therefore, by combining the destination IP (to find the path) and the label provided by the next hop (to encapsulate the packet), R1 successfully directs the traffic through the MPLS core.


177. Frage
Which two statements about the BGP path selection process are correct? (Choose two.)

Antwort: B,D


178. Frage
......

Die Juniper JN0-364 Fragenkataloge von DeutschPrüfung werden von den IT-Experten konzipiert. Sein Design ist eng mit dem heutigen schnell verändernden IT-Markt verbunden. Die Ausbildung von DeutschPrüfung wird Ihnen helfen, mit der erneuerten Technik Ihre Fähigkeit zur Problemlösung zu fördern und Ihre Zufriedenheit am Arbeitsplatz zu verbessern. Die Deckung der Juniper JN0-364 Zertifizierung von DeutschPrüfung ist um 100% als geplant gestiegen. Solange Sie unsere Prüfungsfragen und Antworten verwenden, garantieren wir Ihnen, dass Sie zum ersten Mal die Juniper JN0-364 Prüfung mühlos bestehen können.

JN0-364 Zertifikatsdemo: https://www.deutschpruefung.com/JN0-364-deutsch-pruefungsfragen.html

Juniper JN0-364 Zertifizierungsantworten Wählen Sie unser ExamFragen und bringen Sie Ihrem Leben tiefgreifende Veränderungen, Nun kann DeutschPrüfung JN0-364 Zertifikatsdemo Ihnen viel Zeit und Energie ersparen, Juniper JN0-364 Zertifizierungsantworten Wie so sagt ist es nie spät zu lernen, Juniper JN0-364 Zertifizierungsantworten Wir benachrichtigen den Kandidaten in erster Zeit die neuen Prüfungsmaterialien mit dem besten Service, Darüber hinaus erhalten unsere Nutzer upgedatete JN0-364 Zertifikatsdemo - Service Provider Routing and Switching, Specialist (JNCIS-SP) Fragen und Antworten, sobald das System auf den neuesten Stand gebracht wird.

Der Euro wird auseinanderbrechen, Wird mit den Schiffern JN0-364 Vorbereitungsfragen an das Ufer gebracht, Wählen Sie unser ExamFragen und bringen Sie Ihrem Leben tiefgreifende Veränderungen.

Nun kann DeutschPrüfung Ihnen viel Zeit und Energie ersparen, Wie so sagt JN0-364 ist es nie spät zu lernen, Wir benachrichtigen den Kandidaten in erster Zeit die neuen Prüfungsmaterialien mit dem besten Service.

JN0-364 Prüfungsressourcen: Service Provider Routing and Switching, Specialist (JNCIS-SP) & JN0-364 Reale Fragen

Darüber hinaus erhalten unsere Nutzer upgedatete JN0-364 Testfagen Service Provider Routing and Switching, Specialist (JNCIS-SP) Fragen und Antworten, sobald das System auf den neuesten Stand gebracht wird.

2026 Die neuesten DeutschPrüfung JN0-364 PDF-Versionen Prüfungsfragen und JN0-364 Fragen und Antworten sind kostenlos verfügbar: https://drive.google.com/open?id=18P4KEv491L2Fzr3ZW9ZWhOpM2Fspq3zk

Report this wiki page